The fireplace below has a Starfire base with Black, Azurlite, Azurlite Reflective and a lot of work. Very nice!
On this page (as if you needed another page) We are going to show you how to build a basic fire pit for your deck/ back yard.
This was built by Glenn Harvey of British Columbia.
This first picture is the frame he had started with.
You can make one from metal studs, aluminum studs, etc. Anything non flammable.
Wrap it with wonder board or durock/ cement board.
Below you can also wrap it with wire for better adhesion to the backer board.
This fire pit was natural gas. We also manufacture the burners for propane. Well, we are the only ones who actually manufacture propane burners for your projects.
Below you can see the gas connection coming up from the deck. Glenn used a pan but he also could of used an aluminum/ stainless steel base plate as well.
The stacker stone is now being applied.
As you can see below the trimming valve is installed on the side. You would be surprised on how many plumbers don't think of this little detail, a valve to turn it on or off. I have seen the valves installed inside of the pit or not even at all. You also need to be careful as to not have a gas line installed that is too small for the application.
Now the stone and cap are done, great and simple job!
Below you an see the larger filler lava rock
was installed. If a flat plate were to have been used you wouldn't need the larger filler lava rock base.
Below our crushed lava
was used to cover the larger lava rock to insure the glass does not fall through. This makes an even base. What ever shape you make the lava is the shape the glass will take.
The stone on the side of the fire pit used was to match the stone on the house as well. Looks awesome!
Below is just the Water White
before the colors were added.
The colors that were added are as follows:
If you notice below the center of the sun, it changes when it get hot! This one of our chameleons that change when the glass gets hot. If you look real close at the Orange Topper (next to the suns center) as well, it turns a bright cinnamon red when it get hot also! All of our chameleons will be posted when we get a chance. This is just another one of our product lines that we have not had time to further promote.
Above is the fire burning and
below the fire was just turned off.
Glenn spent a few hours placing all of the glass to make this very cool scene. So don't just think you can just throw it on and it knows were to go. Very creative!
The fire pit below has Azurlite FireGlass/ Fire Glass
installed. This fire pit was to have an electronic ignition
but the pool builder forgot to wire it, oops! We then installed a battery operated IPI system and we will explain as we move on. The first issue was we were told the pit was 8" deep, it was only 6" deep! That will explain why the glass is mounded so high. they put a board on top of the fire pit and measured it to the top not the bottom.
We had to mount the gas on top of the ring because of the measuring mistake.
On the bottom front left of the pictures you can see the blue battery compartment.
This will be just slightly covered with glass but easy to find come the time to replace the batteries.
First layer of glass going on.
Below you can see that the ignition is just above the surface and the battery box is now gone!
We had to add more glass, again because of the 6"/ 8" bad measuring.
Below here it is finished.
Yes it is on the golf course in Palm Desert
CLICK HERE TO PURCHASE IN THE E STORE!
Below we did a Paparazzi photo shoot! This home took 2 years to build! The gates below had Sea Glass laminated to the glass panels.
If you take notice to the outside walls, the entire house was covered in marble! Crown moldings included!
We only do this once in a while, but the home was outstanding. You should of seen the interior!
CLICK HERE TO PURCHASE IN THE E STORE!