Moderustic Aquatic Glassel Fireplace Glass Rocks Propane Fireplaces

Fire Pit Installation Continued'

Patent Ownership and disclaimer

Lantern VortexED (moderustic.com)

Investors Page Information

Some of Ed's project cars For Sale

Fire Pit Installation'

Here Are Some Customer Pictures of Some of Our FireGlass Fire Pit.

Here is a classic example of a traditional lava fire pit before it undergoes the conversion process to a contemporary Fire Glass Fire Pit.

metal fire ring for fire pits with fireglass

Step 1 - Fill the outdoor firepit with lava rock (crushed 1/4" 3/8") over 3/8" 1/2" crushed. Remember the larger is under the smaller to keep the fire glass from falling through.

fire pit convesion

Step 2 - Then we install an extending flex line, so that we can connect the burner ring closer to the surface. Remember you don't want to leave the ring at the bottom. (Well thats unless you want an explosion or if you want to get rid of the significant other!?)

outdoor firepits

Step 3 - The extenidng flex liine is then attached to a burner ring.

outdoor metal fire ring

Step 4 - Pour more crushed lava to make the desired shape of the fire pit and test burn for flame pattern.

patio fire pits

Step 5 - Now for the best part - Adding the Fire Glass! This particular fire pit used Starfire base and a few other colors, which you we will list below.

outdoor fireplace fire pits pictures

Step 6 - Adding a Creative pattern with colorful Glass Fire toppers. Below we are using Azurlite, Scarlet Topper, Red Topping, Ice, Copper Blue Topper,and Copper Blue which is a chameleon as when it gets hot it turns green and when it cools it turns back to blue!

custom patio fire pits

fire glass fire pit designs

rock rocks fireplace

using fireglass for fire pit

glass fire pit rocks

fire pit design ideas

fire ring fire pit

Great job and very creative.

fire pit designs

fire pit glass

EXAMPLE #2 Of A Patio Fire Pit Using Fire Pit Glass.

Here we are showing you how to properly install fireglass into a firepit We recommend starting with less and then you can always add more if you need to.The pictures below are of a self install fire pit with 1/2" to 3/4" of crushed lava rock for the bottom of the ring and Clear base.

fire pit ring

If you want a higher center then pour a little more filler on top of the ring.

adding lava rock to fire pits

Now we will pour the crushed lava rock (1/4" to 3/8") over the filler as this will stop the glass from falling through the lava rock.

fire rock to fire pits

fire pit designs

Finish shaping the lava rock and getting to pour the glass.

shaping fire lava rock in a fire pit

This is a 36" fire pit which requires 56 lbs for a 1" cover and 80 lbs for a 1 1/2" cover. We used the 1" method, 56 lbs which as you can see works just fine and no you can't see though the glass. But keep in mind the less glass over the crushed lava rock - the more likely someone can disturb the top layer and then the lava rock could show through.

fire crystals for patio fire pits

The second step will be to add color and Fire GlassToppers. Don’t be fooled by someone trying to get you to purchase more than you actually need. We recomment using a 1”, 1½” or even the 2” method. Give us a call and we can help guide you in the right direction.

outdoor fire pit ideas using glassfire

EXAMPLE #3 Of an Interior Fire and Glass Fire Table.

The pictures below are from the Lure Lounge at the Wynn in Las Vegas. This was done for Steve Wynn with all gold.

lure logo in las vegas

And here is the fire table lit. Awesome!

If you'd like more information here is their contact information:
Wynn Las Vegas
3131 Las Vegas Boulevard
Las Vegas, Nevada 89109
Phone: (702) 770-7100
Website: www.WynnLasVegas.com
Another site with a nice picture of the pit (two pictures down from the top).

EXAMPLE #4 Building A Natural Gas Fire Pit Using Fire Glass.

The next fire pit was designed and built by Kevin Leys of Chicago. He did a great job. First he started with a single wall construction fire box with a pan on the top.

building a custom fire pit

Then it was framed for exterior plywood or you could use metal studs and wonder board.

hand made fire pit

The gas valve was located to the outer framed wall.

gas valve for opening for custom fire pits

This is a natural gas fire pit. It was tested as soon as it turned dark, fun!

fire pit at night

Now we add the crushed lava rock and glass over that. There are many sub materials you can use as a filler. Just ask.

outdoor fire pits with fire glass rocks

Great back yard by the way! Chicago, remember?

k19

Now we start to apply the tile for the finishing touch.

hand made patio fire pits topped with burning glass

EXAMPLE #4 Another Custom Made Fire Pit Using Fire Glass.

We are going to show you how to build a custom fire on glass outdoor fire pit for your deck or backyard. This was built by Glenn Harvey of British Columbia. This first picture is the frame he had started with. You can make one from metal studs, aluminum studs, etc. Anything non flammable.

Wrap it with wonder board or durock/ cement board.

Below you can also wrap it with wire for better adhesion to the backer board.

Below you can see the gas connection coming up from the deck. Glenn used a pan, which is availbale in aluminum / stainless steel base plate as well. This fire pit was natural gas. We also manufacture the burners for propane. We are the only ones who manufacture propane burners for your custom Fire Glass Fire Pits.

The stacker stone is now being applied.

stacker stone fire pit with metal fire ring

As you can see below the trimming valve is installed on the side. You would be surprised on how many plumbers don't think of this little detail, a valve to turn it on or off. I have seen the valves installed inside of the pit or not even at all. You also need to be careful as to not have a gas line installed that is too small for the application.

Now the stone and cap are done, great and simple job!

custom patio stone fire pits with large metal fire ring

Below you an see the larger filler lava rock was installed. If a flat plate were to have been used you wouldn't need the larger filler lava rock base.

Below our crushed lava was used to cover the larger lava rock to insure the glass does not fall through. This makes an even base. What ever shape you make the lava is the shape the glass will take.

Below we installed Water White base glass (32 lbs) for a 1 1/2" cover!

stone fire pit topped with fire crystals

The stone on the side of the fire pit used was to match the stone on the house as well. Looks awesome!

rock construction fire pit with fire crystal

Below is just the Water White before the colors were added.

The colors that were added are as follows:

Azurlite and Azurlite Reflective for the sky area.

Brilliant Yellow R20F4 Fire Glass Topper for the sun center

Scarlett G072F3 Topping for the suns rays

Orange R140F4 Fire Glass Topper for the ring around the suns center

Emerald Green 1417 Topping for the bottom trees/ grass?

Deep Blue 2507 Fire Glass Topper mixed in around the Azurlite in the sky area.

If you notice below the center of the sun, it changes when it get hot! This one of our fire glass chameleons, that change when the glass gets hot. If you look real close at the Orange Topper (next to the suns center) as well, it turns a bright cinnamon red when it get hot also! All of our chameleons will be posted when we get a chance.

Above is the fire burning and below the fire was just turned off. Glenn spent a few hours placing all of the glass to make this very cool scene. So don't just think you can just throw it on and it knows were to go. Very creative!

This Story Begins As A "What Not To Do". But We Quickly Corrected It & Finished With Another Beautiful Fire and Glass Patio Fire Pit.

First, the burner was installed in the wrong location and it was also the wrong burner type!!! Remember burners must be with in 2" of the surface of the fire pit. Filling the pit with gas and then trying to light it? Nothing good can become of this.

We removed the Fire Rocks. And began to correct the issue of the wrong burner type and its location.

We installed a #304 stainless steel "H" burner, covered it with crushed lava (1/4" / 3/8") over the larger lava rock. This is what keeps it from trickling to the bottom.

Them we topped it with Starfire base glass. Then Eric is trying to decide which colors/ Topper he should add if any at all.Wrong type of burner above. Our "H" burner below. Watch the flame pattern as the crushed lava covers the burners.

fire glass fire pits

custom stone fire pit with burning glass

Now for the big decision, more colors? But which ones?

Here Is A Really Cool Fire Pit Design We Worked On For The Roxbury Hotel.

The fire pit table is at the Roxbury Hotel and we will show you the progress here from beginning to end. This was a propane installation with our FPPK burner. The Glass Fire colors used were: 1/4" Starfire, 1/2" Starfire, Gold, Lime Green Topper, Pale Olive Green Topper, Olive Green
Topper ,a little bit of wood and tile and here you go!

Above shows the framing and the gas line coming in. Below shows the pipe coming out of the floor and the thermo-coupler on the glass next to the igniter.

custom patio fire pit for commercial property

Roxbury Hotel, a cool fire pit!

Visit Our Original
E-STORE

Or Visit Our NEW
E-STORE!

Lantern VortexED (moderustic.com)

NEW PRODUCT

Some of Ed's project cars For Sale

INVESTOR PAGE

We Make Fire Cool!

Moderustic® is proud to have been issued 5 U.S. Patent Numbers
and 1 Patent pending status! 5th one just awarded notice of allowance 10/23/2021
Covering our method of creating tumbled tempered glass for use in fireplaces and fire pits.
Patent Applications Published 2005, 2006, 2014 and 2017 (twice). Worlds most infringed PATENT in WORLD HISTORY!

Safe FIREGlass for Fire Pits and Fireplaces

A must see and read!

Our Glass is SAFE and See Why!

We Appreciate Your Comments & Feed Back. Please
Send Your E-mails or Click HERE to Submit a Survey!

Note* When calling for any technical support we ABSOLUTELY
require Digital photos from a camera not your phone.

(909) 989-6129 Fax: 909 944 3811
or E-mail us at
Ed@Moderustic.com | Jaunzemis@msn.com

Need to know how much you need "HOW MUCH DO I NEED PAGE"	Our Crushed Lava can be purchased online "JUST CLICK HERE"
Do you need a Burner? "JUST CLICK HERE"	Our Fireplace Paint can be purchased online "JUST CLICK HERE"

Click "HERE" to see our Carbon Monoxide Report.

Investment and Partner Opportunities

Stop by and visit our Showroom in Rancho Cucamonga:(just north of the Ontario Airport
Moderustic Inc.
9467 Ninth Street Suite #D
Rancho Cucamonga, California 91730
Hours: Monday-Friday 9:00 to 6:00 Closed Saturday and Sunday, Saturday by appointment only.

If you're coming late, please call us and we will stay late. We are 2 miles North of the Ontario Airport
_________________________________________________________________
Moderustic Fabrication University

"CLICK HERE" or on the Picture below

Investment, Employee or Career Opportunities.
_________________________________________________________________

We Make Fire Cool!

Simple Patents (click here)

RETURN POLICY!

Shipping has become an issue so all orders will and must be signed for. No package will be left at your door unless you sign for it. This is called an indirect or direct signature request. It is also refereed to as a Signature service. If a package or packages are left at your door per your request, you will be the responsible party.
All returns must be made within 30 days of purchase with exceptions only by management
Returned products must be unused and/or unmixed
Returned products must be packaged well to avoid damage in transit, or you will be responsible for the damage
Returned products that are damaged in transit will not be able to be refunded
Refunds will be made towards product cost only
Refunds will not be given for non-product labor costs (consulting fees, installation fees, labor, shipping etc.)
Restock fees may apply depending on which items are being returned. (30% to 70%) Glass/ burning products 30%, Burners 50%, Custom Burners 70%, Metal Pans or any Custom Metal Work, Electronics are not returnable ever!

All returns must have a return authorization (we are not responsible for products being shipped to incorrect addresses due to non-compliance of this policy)
No returns or exchanges will be accepted for any custom metal products or electronics what so ever!
No returns will be accepted for ICS/ Fire Falls, or any other standard or custom fire pits.
No returns on products that contain electronics (if they were used or installed)
We are not responsible for local codes and or if any of our products are or are not approved. Please check with your local building department or governing agencies for proper approvals before purchasing. Custom built or designed items are not returnable for any reason. It is your responsibility to make sure our products do not violate your local building codes. We cannot accept returns should you encounter these issues with your local building authorities.
Any Designs, Drawings, PDF Files, Ideas, Pictures, Attachments, Renderings, Facsimiles, Faxes, Blue Prints, Copies, Documents and even copy written materials once sent to Moderustic Inc, Ed Jaunzemis, Aquatic Glassel or any employee of Moderustic Inc becomes property of said company to use, distribute, copy, reproduce, manipulate, recreate, modify, advertise, promote, lay claim to and or use in our discretion as we need. If you do not agree with these terms then please do not send us anything. Our intentions are to create for you the "Customer" and it is our vast collection of material that will spawn an idea for you to have us create something for you. If we should create something/ anything for you that is one of a kind, you do not own any rights to this or there idea or ideas, product or concept in any way shape or form.

To read all company policies, terms and conditions, CLICK HERE!

Propane Prop 65 Warnings

All of the pictures and content are copyright protected on this website: U.S. Copyright Registration No is: VA 1-650-624
Entitled: "Moderustic 1107"
Effective registration date is February 1, 2008.
Has anyone ever told you "Nice Logs" ? Nooo, I don't think so.
CSLB# C-17 693887

US patent numbers #US9700987B1 and US9808905B2

We Make Fire Cool!

Violators will be prosecuted.

Note* When calling for any technical support we ABSOLUTELY (maybe)
require Digital photos from a camera not your phone (if that is all you have, then that's fine).

(909) 989-6129 Fax: 909 944 3811
or E-mail us at
Ed@Moderustic.com | Jaunzemis@msn.com

_________________________________________________

Click HERE or on the Picture below to see our MOVIES!

Click HERE or on the Picture above to see our MOVIES!
_________________________________________________________________

Check out the Car Garden, A fun car page by Ed

We now have "several" Active Patents and a Patent Pending Status. "We were the first to file" (yes we were), is why we have The Patents for FireGlass.

Prop 65 Warning:

WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer, and Carbon Monoxide, Lead and Lead Compounds which are known to the state of Califronia to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
ADVERTENCIA: Este producto puede exponerlo a productos químicos como el plomo y los compuestos de plomo, sabidos por el estado de California como causa de cáncer, y el monóxido de carbono, el plomo y los compuestos de plomo, sabidos por el estado de Califronia como causa de defectos de nacimiento u otros daños reproductivos. Para obtener más información www.P65Warnings.ca.gov.

For any competitors out there, Second place is first loser. Sorry.

See our page for Investors!

Safe FIREGlass for Fire Pits and Fireplaces

A must see and read!

Patent Piracy is not a victimless crime

US active patent numbers US9700987B1 and US9808905B2

5 Patents and patent pending

Visit www.USPTO.GOV for details on Patent infringement

or E-mail us at
Ed@Moderustic.com | Jaunzemis@msn.com