The pictures below are of Dr Micheal Marshall Fireplace Surrounds
CLICK on the link or the picture below to see the surrounds with the Star-Burst Pattern!
Click "HERE" or on the picture below to see how this was made and installed.
Rick Rogina Fireplace Surround, FireBalls, Direct Vent Conversion with FireGlass
Click "HERE" or on the picture below to see how this started and finished, very simple and very nice
To see how this fireplace was transformed CLICK HERE or on the pictures below!
Creativity and IMAGINATION is how.
The fireplace below is a self install by Joyce and Tom Dane from beginning to end. The fireplace was painted, converted and finished with Pink Rosa. This is a direct vent fireplace and for those of you who say it can't be done, well you just don't know how! We do and thousands of of customers do as well.
Above you can see they painted the interior and it now looks much better.
The lava filler underneath the burner.
Test the burner and pour the glass. There are so many who tell us this can't be done.
You can leave the doors on or take the doors off, which ever you prefer.
We actually prefer the doors and screens removed and finish with some sort of surround.
Here is another tip on How to correctly install a natural gas burner.
A picture is worth a thousand words, here are three thousand words!
The fireplace below is in Beverly Hills and is also a self install direct vent fireplace. This fireplace was filled with Gold and Topped with a few pounds of Platinum.
The old burner was removed and a new bottom plate was installed
Test the burner and thermo-coupler
The Gold was added over the lava rock
and there you have it, fire! If your installer does not understand this then have then call us so we can guide them through the process.
Click HERE or on the picture below to see how this was assembled!
Black Magic, Sterling Silver Panels and Surround
I finally managed to finish the fireplace. We have decided to place a 2" piece of metal in front (which hasn't been done yet), though, to keep the glass off the ledge. We thought it would be deep enough, but that didn't quite work.
To enable me to keep the center area smooth, we had to place the burner on top of the wall pipe, which created a rather high burner placement. This ended up creating a bit of a problem because I had a steep slope to the hearth. This is why I need to add the metal strip in front--so the glass doesn't roll down and come out of the fireplace. We had decided to not have a glass door on it, although if we find something we really like, that could change.
The pics might come in 2-3 e-mails, but I'll describe them here. The first few pics are duplicates of ones I already sent you.
1. Original fireplace, emptied out.
2-3. After painting with the dark blue from the chart you guys gave us. The wall was painted to match, although, I'm not sure I really like it. I'm trying to reserve judgement until I see it for awhile.
The damper handle is a brass duck head which wasn't even noticeable when it was all black.
4-5.New burner in place. This created more problems than expected due to the wall pipe being higher than most. We ended up using regular lava rock, since we couldn't find the smaller rocks. Then we added small pea gravel to fill in gaps around the lava rock. After the burner was finally level, we added the sand.
6. Testing the burner with sand added.
7. Clear glass base added.
9-10. All finished and burning.
We're still working on the right side of this wall which has cabinets holding the TV and storage. Once the entire wall is finished, I'll send you one final pic of the entire wall. Not sure how soon that will happen, so don't wait for it, if you want to post these pics on your website.
I want to thank you for all your help. Your store was great to visit, so we could pick our glass out in person. Your staff was very helpful and we had a great time making our final color choices. I'll will definitely recommend you to others.
Senior Instructor for Art Clay
firstname.lastname@example.org e mail any comments or questions to Judi
The fireplace below has a Starfire base with Citrine, Dark Red Orange, and Orange Topper with a touch of our Ice Ice Ice. This was a complete remodel in natural gas and a remote control was added with a pilot light
The fireplace below is in Palm Desert California and was a self install with a crushed lava base, Clear over the lava, Starfire on top of the Clear and topped with Amber Diamonds and a splash of our Gold . It looked great until they found the burner was too close to the back which burned the back wall. I don't know if this was repaired as we did send paint and instructions on how to prevent this in the future. The fireplace looked great except for the "skid mark" on the back wall.
Above it still looked good here!
About our Diamonds
, they are made of crystal and when you see them in the fireplace you actually see the fire reflection reflecting the flame backward as if the Diamonds
were melting from the inside.
The fireplace below is a before and after and a "how to" make it low and lean. A more contemporary look. This is a self install by Rich Kamins and one very nice job!. He used a Bronze and Bronze Reflective base glass. Topped with a bit of Starfire. Ice Ice Ice and about 2 pounds of Copper Ruby Red Topper for a splash of color.
Typical nasty fireplace before Moderustic!
A few bricks and some drywall
Some sand under the burner for filler to raise the base glass.
And here you have one nice finished fireplace.
The fireplace below is a self install with a bed of crushed lava
and on top we have:
1 double 24" burner
For a lava fill and the base it needs to be back at least 4" so when you pour the glass on you won't see the lava through the glass. Yes they did move the lava back after they e mailed the pictures to us to see if they were doing it right.
Step 2, cover the old brick!
Finish the face and floor, very nice!
On the left side you can see the gas connection which will soon be covered as well. On the right side the control cover will be covered as well. This propane pan burner
was fitted with a remote control, radio frequency.
Now that your finished your ready for FIRE! Have your spouse lite it in the event they didn't follow the instructions! (just kidding again)!
The fireplace below is a Malm Carousel Fireplace ( www.MalmFireplaces.com
). We replaced the attempted dual burner which it was originally installed with with a simple 12" steel ring.
This fireplace has a safety pilot light kit which was still left intact for local code reasons but we did get rid of the non functioning pan burners.
Below we poured the crushed lava
base up to and just covering the ring burner.
With the doors closed just enough as you can see now they can control the hurricane/ tornado effect!
The fireplace below is in Palm Springs, California and is a self install
Clean and paint
the walls in the color of your choice, we offer 25 colors!
Screw on the flex line adapter
Attach the flex line and burner with the flex line under the burner.
Test the burner to insure the flames are not hitting the back wall.
and your done!
The fireplace below is in Santa Monica California. The fireplace is a Malm Fireplace which can be found at:
We used an 18" double stainless steel burner and a bed of Starfire topped with a few pounds of our Ice Ice Ice.
This is a very simple self installation as you will see.
The fireplace below is from Cory here locally in Rancho Cucamonga California. This transformation was a complete surface make over along with out Sterling Silver interior
. The glass that was used was Bronze base glass
. This is truly a DIY project and we like to help you create your ideas to reality.
Here we begin with the old interior brick panels removed.
Below you can see the new stone being applied.
Now you can see the reflection on the walls in the Sterling Silver
panels. No, these are not just mirrors in the fireplace. If you do try this, let us know how it worked out for you. Be sure to send us pictures of your project and we will be sure to post it on our "How Not To Do It Page"
! No, Really!
Again we are proud to constantly give you new and exciting products for your fireplace and fire pit projects.
The fireplace below is in Venice Beach California. This is a direct vent installation and we will now show you how easy it really is. For all of the installers out there who say it can't be done, well here you go. Pay attention now!
The glass that was installed was Starfire.
The house is and was under construction so please excuse the debris around the fireplace. The pictures explain what we did. We didn't change the amount of fuel (btu's) being burned just the way it looks. Flip the switch, the ignitor lights, allowing the gas to come up through the burner and the pilot light lights the gas rising from the burner below. As for the doomsayers that tell you this can't be done, Oh Well! This will be our little secret. If you have any questions on your conversion please send us pictures and we will help you convert your direct vent fireplace as well.
Most fireplace manufactures will tell you this will void your warranty. But you need to actually read the warranty to understand what they will or won't cover. The person telling you this at the factory, ask them what the warranty actually implies. We have read many of these warranties and they won't cover the fireplace anyway. These warranties were written by attorneys to keep the liability from the manufacture and lay the blame on the consumer at any expense, no really read one.
The fireplace below is a self install in Palm Springs at Tim Rockwood's. About 2" of crushed lava was used and a 2" layer of Solex base glass was installed over a double 18" burner. Watch how simple this really is. From ugly to one really nice fireplace.
Above and below is what it looked like when the project was started.
Below you can see the grate (noting great here) and the remote control. Too much stuff in the fireplace if you ask me.
Above, if you use a remote control, let's find a better way of hiding it? You think?
Below all of the STUFF is removed, much better!
Above and below it is now painted and the double 18" burner is installed.
Very clean look! Uncluttered!
Above the lava was poured up to the gas stub on the left side just enough to cover the burner. Be sure to leave 3 to 4" in the front for the glass. You don't want the lava all the way up front.
Now pour the glass and you have a heat producing fireplace as you were supposed to have in the beginning and it looks pretty good too!
These pictures of the fireplace were taken in the daytime if you were thinking why they were so light.
Do it yourself fireplace remodel made easy, or at least it seems that way.
First, the tile that was installed is not rated for fire. This tile would of popped off as soon as the fire was turned on. So do a little research before you begin. We can help in many ways, just call and ask.
It may have of seemed to be a good idea at the time, but it wasn't!
When redesigning a fireplace we suggest card board mache'. A card board board mock up so you can see a basic preview of your project.
Below you can see the bottom, top and mantle in card board.
Now the rip and tear process begins!
Below we installed the extra electrical for the components and the TV. The components will be installed on the right side out of view with a black glass door. This will be installed later.
Below the framing begins.
Below we now added the Durock at the fireplace opening. This is key to the whole project. Math is very important when doing these layouts!
Below you can see the slate is being added.
Above and below the fireplace is 90% finished. The mantle needs to be installed and the door on the right to conceal the components needs to be installed as well. The inside of the fireplace will have 3 pieces of black galaxy granite installed. We will post these pictures of the fireplace when it is completely finished as well.
Now for the glass installation. We started with a satin black paint on the back walls, until we install the granite. Then we bulked up the base with 2" of white sand as this will save you a bunch of money! We used sand because we were pouring Starfire base glass in the fireplace. If we were to use a darker color of glass we would of used our crushed lava rock as a filler. When using sand, always make sure the burner is on top of the sand.
Test the burner/ location making sure the flames don't hit the walls.
Then pour the glass!
We added a few Pink Diamonds and then later added Ice Ice Ice and Clear Diamonds. These products because of the way they are made appear to be melting on the inside.
The sealer that was used was a stone enhancer, not just a regular cheap sealer. When using rock you always want to see the beauty of the stone you are using.
As you can see the mantle is still missing. We have a few more details to still do and as soon as we have time to post the pictures, they will be here.
We encourage imagination to all of our customers and we support you and your projects. Regardless how simple or how creative. This is one of the elements that spawned our success and continues to do so.
The next fireplace was installed by Ken Kenoyer. He constructed his own pan for his Direct Vent Fireplace conversion with our supervision. We will go through the steps to complete his installation. The glass that was used was Starfire base glass and topped with Red Topping and Red Topper. We will explain as we move forward.
Above is your fireplace now (if you like logs).
Below is your burner system that came with your wonderful Direct Vent Fireplace and logs.
Below is a pictures of your pilot light system
Below we have removed the "stuff" and exposed the pilot and gas connection.
Royce built a pan to fit the fireplace.
Below he cut the pan out to accept the pilot light.
Connected the gas line.
Tested the burner.
Pour the glass and your done! If anyone has told you that you can't convert a direct vent fireplace then these pictures and project don't exist! Just because they don't know what or how to do it, doesn't mean it can't be done.
The glass face is back on and it looks much better. A very nice and simple Self Installation!