This new product will allow you to convert any table into a fire table. We can build these with a natural gas burner or even a propane burner. We can add fibre optics, water, fire, Fire Stones, Fire Balls, Fire Shapes, lava, sand, glass or anything else you can dream of. These are the first pictures of these bowl which come in dozens of sizes. The glass that was used in this bowl was Dark Red Orange Topper and Yellow Amber Topper. This bowl was set up with one of our 12" FPPK propane burners.
We will be posting our bowl sizes in standard and as for custom we can make anything. We will also be posting dozens of pictures of the other projects as we have time, like we didn't post enough already?
Dark Red Orange Topper over the base glass. The controls were covered after the install was finished. If you look closely you can see the pilot light assembly.
This next fireplace was done with lack of knowledge! First they installed a 18" single burner and some real interesting choices of glass. What they did do correct is have a 3" sand bed under their yuk glass. The first issue we repaired was the stub out on the left side of the fireplace floor. All we did was install a 90 degree elbow and connect a 1/2" flex line to the new double 24" burner. They had left the flex pointing in the air and then reduced it to a 3/8" line and to top that off added they very sad single 18" burner. We repainted their futile attempt (of painting) with dark metallic brown, added 10 lbs of sand and poured 75 lbs of Starfire Base Glass over the new burner and sand filler. We will explain as we move forward:
Below you can see the black marks under the paint.
Below you can see the flex line that was installed was left above the surface. Now if we tried that I think our customers would take us out and string us up, what do you think? To top it off this customer was an attorney! Completely happy with what we did.
Now we added the Starfire Base Glass. One thing we have been doing a little bit different is to bring the glass out from the front of the fireplace. We let the glass come out of the fireplace from 3 to 6 inches to make it look even more grand. What do you think?
Here is a the almost finished product of what we do! We left several colors with the customer to add. We will post pictures when they arrive.
Below are the finished pictures of what else was added: